Kimber Kable Speaker Cables

KWIK 12 & 16/ 4PR/ 8PR/ 4VS/ 8VS/ 4TC/ 8TC
Monocle X/ Monocle XL/ Bifocal X/ Bifocal XL/ Connector Options

Kimber Kable 4 TC

Consisting of eight individual TCSS conductors, four clear and four white that utilize our proven braiding technique. The insulating dielectric is high pressure-low temperature-extruded Teflon®. The individual conductors are Hyper-pure copper, arranged in proven VariStrandTM conductor geometry. The aggregate wire size is two 13 awg conductors. The focus, transparency, and transient speed of 4TC are stunning. 4TC continues to receive enthusiastic reviews and recommendations from consumers and critics worldwide.
  • Four clear and four white braided conductors
  • 2 x 13 awg / 2.63mm
  • VaristrandTM Hyper-pure copper
  • Teflon® dielectric

Basic electrical specifications:

[Based on - 4TC, 2.5m, bare wire ends]
(Cp) parallel capacitance: 362.0 pF @ 20 kHz
(Ls) series inductance: 0.715 µH @ 20 kHz
(Rdc) dc loop resistance: 0.038 Ω
(Xt) total reactance: 0.071 Ω @ 20 kHz
Frequency response ± 0.5 dB: dc - 500 kHz

The High Performance Standard
Kimber Kable 4TC

Call to order - (206) 523-2269

* Cable Type
Full Range One cable per channel with two connectors at each end.
Two cables per channel terminated into two connectors at the amplifier and four at the speaker.

** Assembly
Fully assembled: completely assembled and tested cable(s).
DIY:Do-It-Yourself cable kit includes the raw cable(s), heat shrink tubing, your choice of connectors, solder and instructions; all you need to do is strip the wires, solder the ends and shrink the protective sleeves. Bare wire kit includes the raw cable(s), heat shrink tubing, and instructions only.


For questions or custom configurations please contact us

Speakerlab 6220 Roosevelt Way NE Seattle, Washington 98115 USA
Tel: (206) 523-2269 Fax: (206) 523-2389 Email:

Online Store Policies